Novel synergistic interactions between monolaurin, a mono-acyl glycerol and ß lactam antibiotics against Staphylococcus aureus: an in vitro study.

BACKGROUND: A major worldwide health issue is the rising frequency of resistance of bacteria.Drug combinations are a winning strategy in fighting resistant bacteria and might help in protecting the existing drugs.Monolaurin is natural compound extracted from coconut oil and has a promising antimicrobial activity against Staphylococcus.aureus. This study aims to examine the efficacy of monolaurin both individually and in combination with ß-lactam antibiotics against Staphylococcus aureus isolates. METHODS: Agar dilution method was used for determination of minimum inhibitory concentration (MIC) of monolaurin against S.aureus isolates. Scanning electron microscope (SEM) was used to detect morphological changes in S.aureus after treatment with monolaurin. Conventional and Real-time Polymerase chain reaction (RT-PCR) were performed to detect of beta-lactamase (blaZ) gene and its expressional levels after monolaurin treatment. Combination therapy of monolaurin and antibiotics was assessed through fractional inhibitory concentration and time-kill method. RESULTS: The antibacterial activity of monolaurin was assessed on 115 S.aureus isolates, the MIC of monolaurin were 250 to 2000 µg/ml. SEM showed cell elongation and swelling in the outer membrane of S.aureus in the prescence of 1xMIC of monolaurin. blaZ gene was found in 73.9% of S.aureus isolates. RT-PCR shows a significant decrease in of blaZ gene expression at 250 and 500 µg/ml of monolaurin. Synergistic effects were detected through FIC method and time killing curve. Combination therapy established a significant reduction on the MIC value. The collective findings from the antibiotic combinations with monolaurin indicated synergism rates ranging from 83.3% to 100%.In time-kill studies, combination of monolaurin and ß-lactam antibiotics produced a synergistic effect. CONCLUSION: This study showed that monolaurin may be a natural antibacterial agent against S. aureus, and may be an outstanding modulator of ß-lactam drugs. The concurrent application of monolaurin and ß-lactam antibiotics, exhibiting synergistic effects against S. aureus in vitro, holds promise as potential candidates for the development of combination therapies that target particularly, patients with bacterial infections that are nearly incurable.

Relationships between the inhibitory efficacy and physicochemical properties of six organic acids and monolaurin against Bacillus weihenstephanensis KBAB4 growth in liquid medium.

Organic acids are widely used in foodstuffs to inhibit pathogen and spoiler growth. In this study, six organic acids (acetic, lactic, propionic, phenyllactic, caprylic, and lauric acid) and monolaurin were selected based on their physicochemical properties: their molecular structure (carbon chain length), their lipophilicity (logP), and their ability to dissociate in a liquid environment (pKa). The relation between these physicochemical properties and the inhibitory efficacy against B. weihenstephanensis KBAB4 growth was evaluated. After assessing the active form of these compounds against the strain (undissociated, dissociated or both forms), their MIC values were estimated in nutrient broth at pH 6.0 and 5.5 using two models (Lambert & Pearson, 2000; Luong, 1985). The use of two models highlighted the mode of action of an antibacterial compound in its environment, thanks to the additional estimation of the curve shape α or the Non-Inhibitory Concentration (NIC). The undissociated form of the tested acids is responsible for growth inhibition, except for lauric acid and monolaurin. Moreover, long-carbon chain acids have lower estimated MICs, compared to short-chain acids. Thus, the inhibitory efficacy of organic acids is strongly related to their carbon chain length and lipophilicity. Lipophilicity is the main mechanism of action of a membrane-active compound, it can be favored by long chain structure or high pKa in an acid environment like food.

13-oxyingenol dodecanoate derivatives induce mitophagy and ferroptosis through targeting TMBIM6 as potential anti-NSCLC agents.

Ingenol diterpenoids continue to attract the attention for their extensive biological activity and novel structural features. To further explore this type of compound as anti-tumor agent, 13-oxyingenol dodecanoate (13-OD) was prepared by a standard chemical transformation from an Euphorbia kansui extract, and 29 derivatives were synthesized through parent 13-OD. Their inhibition activities against different types of cancer were screened and some derivatives showed superior anti-non-small cell lung cancer (NSCLC) cells cytotoxic potencies than oxaliplatin. In addition, TMBIM6 was identified as a crucial cellular target of 13-OD using ABPP target angling technique, and subsequently was verified by pull down, siRNA interference, BLI and CETSA assays. With modulating the function of TMBIM6 protein by 13-OD and its derivatives, Ca2+ release function was affected, causing mitochondrial Ca2+ overload, depolarisation of membrane potential. Remarkably, 13-OD, B6, A2, and A10-2 induced mitophagy and ferroptosis. In summary, our results reveal that 13-OD, B6, A2, and A10-2 holds great potential in developing anti-tumor agents for targeting TMBIM6.

Digital light 4D printing of bioresorbable shape memory elastomers for personalized biomedical implantation.

Four-dimensional (4D) printing unlocks new potentials for personalized biomedical implantation, but still with hurdles of lacking suitable materials. Herein, we demonstrate a bioresorbable shape memory elastomer (SME) with high elasticity at both below and above its phase transition temperature (Ttrans). This SME can be digital light 3D printed by co-polymerizing glycerol dodecanoate acrylate prepolymer (pre-PGDA) with acrylic acid monomer to form crosslinked Poly(glycerol dodecanoate acrylate) (PGDA)-Polyacrylic acid (PAA), or PGDA-PAA network. The printed complex, free-standing 3D structures with high-resolution features exhibit shape programming properties at a physiological temperature. By tuning the pre-PGDA weight ratios between 55 wt% and 70 wt%, Ttrans varies between 39.2 and 47.2 ℃ while Young's moduli (E) range 40-170 MPa below Ttrans with fractural strain (εf) of 170 %-200 %. Above Ttrans, E drops to 1-1.82 MPa which is close to those of soft tissue. Strikingly, εf of 130-180 % is still maintained. In vitro biocompatibility test on the material shows > 90 % cell proliferation and great cell attachment. In vivo vascular grafting trials underline the geometrical and mechanical adaptability of these 4D printed constructs in regenerating the aorta tissue. Biodegradation of the implants shows the possibility of their full replacement by natural tissue over time. To highlight its potential for personalized medicine, a patient-specific left atrial appendage (LAA) occluder was printed and implanted endovascularly into an in vitro heart model. STATEMENT OF SIGNIFICANCE: 4D printed shape-memory elastomer (SME) implants particularly designed and manufactured for a patient are greatly sought-after in minimally invasive surgery (MIS). Traditional shape-memory polymers used in these implants often suffer from issues like unsuitable transition temperatures, poor biocompatibility, limited 3D design complexity, and low toughness, making them unsuitable for MIS. Our new SME, with an adjustable transition temperature and enhanced toughness, is both biocompatible and naturally degradable, particularly in cardiovascular contexts. This allows implants, like biomedical scaffolds, to be programmed at room temperature and then adapt to the body's physiological conditions post-implantation. Our studies, including in vivo vascular grafts and in vitro device implantation, highlight the SME's effectiveness in aortic tissue regeneration and its promising applications in MIS.

Medium-Chain Fatty Acid Feeding Reduces Oxidation and Causes Panacinar Steatosis in Livers of Neonatal Pigs.

BACKGROUND: Medium-chain fatty acids (MCFAs) are commonly used to enhance the caloric content of infant formulas. We previously reported that pigs fed MCFA developed hepatic steatosis when compared to those fed isocaloric long-chain fatty acid (LCFA) rich formula. OBJECTIVES: The objectives of this study were to investigate: 1) whether MCFA and LCFA feeding affect hepatic fatty acid oxidation, and 2) how fat type alters the expression of hepatic fatty acid metabolic genes. METHODS: Twenty-six, 7-d-old pigs were fed a low-energy control (CONT) formula, or 2 isocaloric high-energy formulas rich in LCFA or MCFA for 22 days. Livers were collected for examining ex vivo fatty acid oxidation, fatty acid content, and mRNA expression of fatty acid metabolic genes. RESULTS: Liver fat was 20% for pigs in the MCFA compared with 2.9% and 4.6% for those in the CONT and LCFA groups (P < 0.05). MCFA-fed pigs had greater amounts of hepatic laurate, myristate, palmitate, and palmitoleate (14, 34, 49, and 9.3 mg · g-1) than those fed LCFA and CONT (1.8, 1.9, 19, 1.5 mg · g-1) formulas (P ≤ 0.05). Hepatic laurate and palmitate oxidation was reduced for pigs fed MCFA (29 mmol · mg-1 · h-1) compared with those fed CONT (54 mmol · mg-1 · h-1) and LCFA (51 mmol · mg-1 · h-1) formulas (P < 0.05). Expression of fatty acid synthase 3 (FASN-3), fatty acid binding protein 1 (FABP-1), and acetyl-CoA carboxylase 1 (ACACA-1) were 8-, 6-, and 2-fold greater for pigs in the MCFA than those in the LCFA and CONT groups (P < 0.05). CONCLUSIONS: Feeding MCFA resulted in hepatic steatosis compared with an isocaloric formula rich in LCFA. Steatosis occurred concomitantly with reduced fatty acid oxidation but greater mRNA expression of fatty acid synthetic and catabolic genes.

Hemicellulose-based nanoaggregate-incorporated biocompatible hydrogels with enhanced mechanical properties and sustained controlled curcumin release behaviors.

Local drug delivery has generated considerable interest due to its controlled and sustained drug release at the target site on demand. Nanoaggregate-incorporated composite hydrogels are desirable as local drug delivery systems; however, it is difficult to achieve sustained and controlled hydrophobic drug release and superior mechanical properties in one system. Herein, a "smart" composite hydrogel was synthesized by incorporating hemicellulose-based nanoaggregates into a double network consisting of alginate/Ca2+ and polyacrylic acid-co-dimethylaminoethyl methacrylate [P(AA-co-DMAEMA)]. Hemicellulose-based nanoaggregates were assembled from xylan-rich hemicellulose laurate methacrylate (XH-LA-MA) polymers and entrapped into the hydrogel framework via chemical fixation. Another composite hydrogel with physically embedded hemicellulose laurate (XH-LA) nanoaggregates was prepared as a comparison. Accordingly, covalently cross-linked XH-LA-MA nanoaggregates in hydrogels resulted in a denser pore structure and reinforced mechanical properties. Nanoaggregate diffusion analysis revealed that covalent bonding between the nanoaggregates and the hydrogel framework contributed to prolonged diffusion behavior. Curcumin (Cur)-loaded XH-LA-MA composite hydrogels enabled sustained Cur release in simulated body fluid and showed stimulus responsiveness toward ethylenediaminetetraacetic acid (EDTA) and/or glutathione (GSH). All the composite hydrogels were biocompatible, as verified by Cell Counting Kit-8 (CCK-8) assay against NIH/3T3 cells. These composite hydrogels hold great potential as a promising dosage form for biomedical applications.

Synthesis of lipophilic antioxidant tyrosol laurate using imidazolium ionic liquid [Bmim]HSO4 as a catalyst.

Tyrosol is a natural phenolic compound with potent antioxidant properties in the field of food manufacturing. However, the low lipophilicity of tyrosol limited its application. Therefore, the construction of tyrosol laurate (Tyr-L) could effectively overcome the limitations of tyrosol. In this work, four ionic liquids (ILs) were applied for TYr-L preparation. Among them, the 1-butyl-3-methylimidazolium hydrogen sulfate ([Bmim]HSO4) showed the best catalytic performance. The maximum TYr-L yield was achieved (94.24 ± 1.23 %) under the optimal conditions (reaction temperature 119 °C, substrate ratio 1:6.7, IL dosage 9.2 %, and reaction time 12 h). The kinetic and thermodynamic parameters were also evaluated and it was found that Ea, ΔH, ΔS, and ΔG were 80.81 kJ·mol-1, 77.63 kJ·mol-1, -82.08 J·(mol·K)-1, and 109.89 kJ·mol-1, respectively. The acidic [Bmim]HSO4 demonstrated excellent reusability and stability, even after 6 cycles. Furthermore, TYr-L showed superior ABTS radical scavenging ability, which could be further applied in various industrial processes.

[Role and related mechanisms of LiaSR two-component system in acid tolerance and biofilm formation of Streptococcus mutans].

Objective: To investigate the role and related mechanisms of the LiaSR two-component system in acid tolerance and biofilm formation abilities of Streptococcus mutans (Sm) 593. Methods: The growth curves of various Sm strains in pH=5.5 brian heart infusion (BHI) medium were analyzed. And colony forming unit (CFU) was also performed to evaluate the acid tolerance of Sm. Laurdan probe, H+-K+adenosine triphosphate (ATP)ase activity analysis kit, proton permeability assay and real-time fluorescence quantitative PCR (RT-qPCR) were conducted to detect the acid tolerant mechanisms of LiaSR two-component system in Sm. Crystal violet staining, CFU, SYTOX probe and anthrone-sulfuric method were used to analyze the properties and structures of the Sm biofilms. RT-qPCR was conducted to detect the expression levels of underlying regulated genes. Results: The growth of mutants in acidic BHI were inhibited (P<0.05). The acid tolerance of mutants significantly decreased compared to the wild-type strain (P<0.05). In mutants, the activity of H+-ATPase (917.06±59.53 and 469.53±47.65) were elevated by 7.22-folds and 3.70-folds compared to the wild-type strain (127.00±50.71) (P<0.001, P<0.001) and the encoded gene atpD (3.39±0.21 and 1.94±0.17) were also elevated by 3.39-folds and 1.94-folds compared to the wild-type strain (1.00±0.15) (P<0.001, P=0.001). The Laurdan generalized polarization of mutants (0.18±0.04 and 0.18±0.05) increased significantly compared to the wild-type strain (0.08±0.05) (P=0.006, P=0.003) and the expression levels of fabM gene were decreased in mutants (0.52±0.11 and 0.57±0.05) by 1/2 (P=0.014, P=0.022). In liaR deletion mutant, the reduced terminal pH (4.76±0.01) can also be observed (P<0.001). The total amount of the biofilms of three Sm didn't show significant differences (P>0.05). But the number of viable bacteria of mutants' biofilms were decreased [Sm 593: (12.00±2.80)×107 CFU/ml; Sm ΔliaS: (2.95±1.13)×107 CFU/ml; Sm ΔliaR: (7.25±1.60)×107 CFU/ml] (P=0.001, P=0.024). The extracellular DNA were increased by 18.00-folds and 6.50-folds in mutants' biofilms (128.73±15.65 and 46.38±5.52) compared to the wild-type strain (7.16±3.62) (P<0.001, P=0.003). Water-soluble exopolysaccharides could be found up-regulated in liaS deletion mutant [(138.73±10.12) µg/ml] (P=0.003) along with the expression level of gtfC gene (1.65±0.39) (P=0.014). The expression level of gtfD were elevated by 47.43-folds and 16.90-folds in mutants (P<0.001, P=0.010). Conclusions: The LiaSR two-component system can promote the expression of fabM gene and increase the fluidity of Sm which contributes to acid tolerance. The LiaR can also decrease the proton permeability and restrict the entrance of H+. The LiaSR two-component system can negatively regulate the production of the extracellular matrix in Sm biofilm.

Effects of a mixture of glycerol monolaurate and cinnamaldehyde supplementation on laying performance, egg quality, and antioxidant status in laying hens.

BACKGROUND: This study aimed to determine the effects of a mixture of glycerol monolaurate and cinnamaldehyde (GCM) supplementation on the laying performance, egg quality, antioxidant capacity, and serum parameters of laying hens. A total of 1120 14-week-old Jingfen-1 strain laying hens with similar performance were randomly allocated to four dietary treatments: control, and GCM groups supplemented with 250, 500, or 1000 mg kg-1 for 12 weeks. RESULTS: Compared with the control group, GCM-supplemented groups significantly reduced (P < 0.05) the rate of unqualified eggs of laying hens aged 17-24 weeks. Supplementation of GCM significantly increased (P < 0.05) yolk color and serum glutathione peroxidase (GSH-Px) activity but decreased (P < 0.05) the hydrogen peroxide (H2 O2 ) content in the serum of laying hens at the age of 20 weeks. Furthermore, groups supplemented with GCM showed a significant increase (P < 0.05) in Haugh unit, yolk color, activities of total superoxide dismutase and GSH-Px, and the glucose content in serum, and a decrease (P < 0.05) in the content of urea nitrogen and H2 O2 and malondialdehyde in serum of laying hens at the age of 24 weeks. 500 mg kg-1 GCM supplementation significantly increased (P < 0.05) the number of large white follicles and 1000 mg kg-1 GCM supplementation decreased the number of large yellow follicles in 28-week-old laying hens. CONCLUSION: These results indicated that GCM supplementation has positive effects on reducing egg loss and improving egg quality in the early laying period of laying hens. © 2023 Society of Chemical Industry.

Divergent Pseudomonas aeruginosa LpxO enzymes perform site-specific lipid A 2-hydroxylation.

Pseudomonas aeruginosa can survive in a myriad of environments, partially due to modifications of its lipid A, the membrane anchor of lipopolysaccharide. We previously demonstrated that divergent late acyltransferase paralogs, HtrB1 and HtrB2, add acyloxyacyl laurate to lipid A 2- and 2'-acyl chains, respectively. The genome of P. aeruginosa also has genes which encode two dioxygenase enzymes, LpxO1 and LpxO2, that individually hydroxylate a specific secondary laurate. LpxO1 acts on the 2'-acyloxyacyl laurate (added by HtrB2), whereas LpxO2 acts on the 2-acyloxyacyl laurate (added by HtrB1) in a site-specific manner. Furthermore, while both enzyme pairs are evolutionarily linked, phylogenomic analysis suggests the LpxO1/HtrB2 enzyme pair as being of ancestral origin, present throughout the Pseudomonas lineage, whereas the LpxO2/HtrB1 enzyme pair likely arose via horizontal gene transfer and has been retained in P. aeruginosa over time. Using a murine pulmonary infection model, we showed that both LpxO1 and LpxO2 enzymes are functional in vivo, as direct analysis of in vivo lipid A structure from bronchoalveolar lavage fluid revealed 2-hydroxylated lipid A. Gene expression analysis reveals increased lpxO2 but unchanged lpxO1 expression in vivo, suggesting differential regulation of these enzymes during infection. We also demonstrate that loss-of-function mutations arise in lpxO1 and lpxO2 during chronic lung infection in people with cystic fibrosis (CF), indicating a potential role for pathogenesis and airway adaptation. Collectively, our study characterizes lipid A 2-hydroxylation during P. aeruginosa airway infection that is regulated by two distinct lipid A dioxygenase enzymes.IMPORTANCEPseudomonas aeruginosa is an opportunistic pathogen that causes severe infection in hospitalized and chronically ill individuals. During infection, P. aeruginosa undergoes adaptive changes to evade host defenses and therapeutic interventions, increasing mortality and morbidity. Lipid A structural alteration is one such change that P. aeruginosa isolates undergo during chronic lung infection in CF. Investigating genetic drivers of this lipid A structural variation is crucial in understanding P. aeruginosa adaptation during infection. Here, we describe two lipid A dioxygenases with acyl-chain site specificity, each with different evolutionary origins. Further, we show that loss of function in these enzymes occurs in CF clinical isolates, suggesting a potential pathoadaptive phenotype. Studying these bacterial adaptations provides insight into selection pressures of the CF airway on P. aeruginosa phenotypes that persist during chronic infection. Understanding these adaptive changes may ultimately provide clinicians better control over bacterial populations during chronic infection.

Generalized polarization and time-resolved fluorescence provide evidence for different populations of Laurdan in lipid vesicles.

The solvatochromic dye Laurdan is widely used in sensing the lipid packing of both model and biological membranes. The fluorescence emission maximum shifts from about 440 nm (blue channel) in condensed membranes (So) to about 490 nm (green channel) in the liquid-crystalline phase (Lα). Although the fluorescence intensity based generalized polarization (GP) is widely used to characterize lipid membranes, the fluorescence lifetime of Laurdan, in the blue and the green channel, is less used for that purpose. Here we explore the correlation between GP and fluorescence lifetimes by spectroscopic measurements on the So and Lα phases of large unilamellar vesicles of DMPC and DPPC. A positive correlation between GP and the lifetimes is observed in each of the optical channels for the two lipid phases. Microfluorimetric determinations on giant unilamellar vesicles of DPPC and DOPC at room temperature are performed under linearly polarized two-photon excitation to disentangle possible subpopulations of Laurdan at a scale below the optical resolution. Fluorescence intensities, GP and fluorescence lifetimes depend on the angle between the orientation of the linear polarization of the excitation light and the local normal to the membrane of the optical cross-section. This angular variation depends on the lipid phase and the emission channel. GP and fluorescence intensities in the blue and green channel in So and in the blue channel in Lα exhibit a minimum near 90o. Surprisingly, the intensity in the green channel in Lα reaches a maximum near 90o. The fluorescence lifetimes in the two optical channels also reach a pronounced minimum near 90o in So and Lα, apart from the lifetime in the blue channel in Lα where the lifetime is short with minimal angular variation. To our knowledge, these experimental observations are the first to demonstrate the existence of a bent conformation of Laurdan in lipid membranes, as previously suggested by molecular dynamics calculations.

FRET-GP - A Local Measure of the Impact of Transmembrane Peptide on Lipids.

Reconstitution of a transmembrane protein in model lipid systems allows studying its structure and dynamics in isolation from the complexity of the natural environment. This approach also provides a well-defined environment for studying the interactions of proteins with lipids. In this work, we describe the FRET-GP method, which utilizes Förster resonance energy transfer (FRET) to specifically probe the nanoenvironment of a transmembrane domain. The tryptophan residues flanking this domain act as efficient FRET donors, while Laurdan acts as acceptor. The fluorescence of this solvatochromic probe is quantified using generalized polarization (GP) to report on lipid mobility in the vicinity of the transmembrane domain. We applied FRET-GP to study the transmembrane peptide WALP incorporated in liposomes. We found that the direct excitation of Laurdan to its second singlet state strongly contributes to GP values measured in FRET conditions. Removal of this parasitic contribution was essential for proper determination of GPFRET - the local analogue of classical GP parameter. The presence of WALP significantly increased both parameters but the local effects were considerably stronger (GPFRET ≫ GP). We conclude that WALP restricts lipid movement in its vicinity, inducing lateral inhomogeneity in membrane fluidity. WALP was also found to influence lipid phase transition. Our findings demonstrated that FRET-GP simultaneously provides local and global results, thereby enhancing the depth of information obtained from the measurement. We highlight the simplicity and sensitivity of the method, but also discuss its potential and limitations in studying protein-lipid interactions.

Deep Eutectic Solvents as Suitable Solvents for Lipase-Catalyzed Transesterification Reactions.

In this work, three deep eutectic mixtures (DES 1: choline chloride/urea; DES 2: choline chloride/glycerol; and DES 3: tetrabutylammonium bromide/imidazole) were investigated as mediums for the synthesis of glucose laurate and glucose acetate. Aiming to achieve a greener and more sustainable approach, the synthesis reactions were catalyzed by lipases from Aspergillus oryzae (LAO), Candida rugosa (LCR), and porcine pancreas (LPP). The hydrolytic activity of lipases against p-nitrophenyl hexanoate revealed no evidence of enzyme inactivation when DES were used as medium. Regarding the transesterification reactions, combining LAO or LCR with DES 3 resulted in the efficient production of glucose laurate (from glucose and vinyl laurate) (conversion >60 %). The best result for LPP was observed in DES 2, with 98 % of product production after 24 hours of reaction. When replacing vinyl laurate by a smaller hydrophilic substrate, vinyl acetate, a distinct behavior was observed. LCR and LPP performed better in DES 1, yielding more than 80 % of glucose acetate after 48 hours of reaction. The catalytic activity of LAO was less pronounced, reaching only nearly 40 % of product in DES 3. The results highlight the potential of combining biocatalysis with greener and environmentally-safer solvents, for the synthesis of differentiated chain-length sugar fatty acid esters (SFAE).

Feeding medium-chain fatty acid-rich formula causes liver steatosis and alters hepatic metabolism in neonatal pigs.

Medium-chain fatty acids (MCFA) and long-chain fatty acids (LCFAs) are often added to enhance the caloric value of infant formulas. Evidence suggests that MCFAs promote growth and are preferred over LCFAs due to greater digestibility and ease of absorption. Our hypothesis was that MCFA supplementation would enhance neonatal pig growth to a greater extent than LCFAs. Neonatal pigs (n = 4) were fed a low-energy control (CONT) or two isocaloric high-energy formulas containing fat either from LCFAs, or MCFAs for 20 days. Pigs fed the LCFAs had greater body weight compared with CONT- and MCFA-fed pigs (P < 0.05). In addition, pigs fed the LCFAs and MCFAs had more body fat than those in the CONT group. Liver and kidney weights as a percentage of body weight were greater (P ≤ 0.05) for pigs fed the MCFAs than those fed the CONT formula, and in those fed LCFAs, liver and kidney weights as a percentage of body weight were intermediate (P ≤ 0.05). Pigs in the CONT and LCFA groups had less liver fat (12%) compared with those in the MCFA (26%) group (P ≤ 0.05). Isolated hepatocytes from these pigs were incubated in media containing [13C]tracers of alanine, glucose, glutamate, and propionate. Our data suggest alanine contribution to pyruvate is less in hepatocytes from LCFA and MCFA pigs than those in the CONT group (P < 0.05). These data suggest that a formula rich in MCFAs caused steatosis compared with an isocaloric LCFA formula. In addition, MCFA feeding can alter hepatocyte metabolism and increase total body fat without increasing lean deposition.NEW & NOTEWORTHY Our data suggest that feeding high-energy MCFA formula resulted in hepatic steatosis compared with isoenergetic LCFA or low-energy formulas. Steatosis coincided with greater laurate, myristate, and palmitate accumulation, suggesting elongation of dietary laurate. Data also suggest that hepatocytes metabolized alanine and glucose to pyruvate, but neither entered the tricarboxylic acid (TCA) cycle. In addition, the contribution of alanine and glucose was greater for the low-energy formulas compared with the high-energy formulas.

Cells immersed in collagen matrices show a decrease in plasma membrane fluidity as the matrix stiffness increases.

Cells are constantly adapting to maintain their identity in response to the surrounding media's temporal and spatial heterogeneity. The plasma membrane, which participates in the transduction of external signals, plays a crucial role in this adaptation. Studies suggest that nano and micrometer areas with different fluidities at the plasma membrane change their distribution in response to external mechanical signals. However, investigations linking fluidity domains with mechanical stimuli, specifically matrix stiffness, are still in progress. This report tests the hypothesis that the stiffness of the extracellular matrix can modify the equilibrium of areas with different order in the plasma membrane, resulting in changes in overall membrane fluidity distribution. We studied the effect of matrix stiffness on the distribution of membrane lipid domains in NIH-3 T3 cells immersed in matrices of varying concentrations of collagen type I, for 24 or 72 h. The stiffness and viscoelastic properties of the collagen matrices were characterized by rheometry, fiber sizes were measured by Scanning Electron Microscopy (SEM) and the volume occupied by the fibers by second harmonic generation imaging (SHG). Membrane fluidity was measured using the fluorescent dye LAURDAN and spectral phasor analysis. The results demonstrate that an increase in collagen stiffness alters the distribution of membrane fluidity, leading to an increasing amount of the LAURDAN fraction with a high degree of packing. These findings suggest that changes in the equilibrium of fluidity domains could represent a versatile and refined component of the signal transduction mechanism for cells to respond to the highly heterogeneous matrix structural composition. Overall, this study sheds light on the importance of the plasma membrane's role in adapting to the extracellular matrix's mechanical cues.

Cell lipid droplet heterogeneity and altered biophysical properties induced by cell stress and metabolic imbalance.

Lipid droplets (LD) are important regulators of lipid metabolism and are implicated in several diseases. However, the mechanisms underlying the roles of LD in cell pathophysiology remain elusive. Hence, new approaches that enable better characterization of LD are essential. This study establishes that Laurdan, a widely used fluorescent probe, can be used to label, quantify, and characterize changes in cell LD properties. Using lipid mixtures containing artificial LD we show that Laurdan GP depends on LD composition. Accordingly, enrichment in cholesterol esters (CE) shifts Laurdan GP from ∼0.60 to ∼0.70. Moreover, live-cell confocal microscopy shows that cells present multiple LD populations with distinctive biophysical features. The hydrophobicity and fraction of each LD population are cell type dependent and change differently in response to nutrient imbalance, cell density, and upon inhibition of LD biogenesis. The results show that cellular stress caused by increased cell density and nutrient overload increased the number of LD and their hydrophobicity and contributed to the formation of LD with very high GP values, likely enriched in CE. In contrast, nutrient deprivation was accompanied by decreased LD hydrophobicity and alterations in cell plasma membrane properties. In addition, we show that cancer cells present highly hydrophobic LD, compatible with a CE enrichment of these organelles. The distinct biophysical properties of LD contribute to the diversity of these organelles, suggesting that the specific alterations in their properties might be one of the mechanisms triggering LD pathophysiological actions and/or be related to the different mechanisms underlying LD metabolism.

Synthesis and characterization of sago starch nanocrystal laurate as a food grade particle emulsifier.

Starch nanocrystals (SNCs) are tiny particles that possess unique qualities due to their small size, such as increased crystallinity, thin sheet structure, low permeability, and strong resistance to digestion. Although sago starch nanocrystals (SNCs) are naturally hydrophilic, their properties can be modified through chemical modifications to make them more versatile for various applications. In this study, the esterification process was used to modify SNCs using lauroyl chloride (LC) to enhance their surface properties. Three different ratios of LC to SNC were tested to determine the impact on the modified SNC (mSNC). The chemical changes in the mSNC were analyzed using FTIR and 1H NMR spectroscopy. ##The results showed that as the amount of LC increased, the degree of substitution (DS) also increased, which reduced the crystallinity of the mSNC and its thermal stability. However, the esterification process also improved the hydrophobicity of the SNC, making it more amphiphilic. The emulsification capabilities of the mSNC were investigated using a Pickering emulsion, and the results showed that the emulsion made from mSNC-1.0 had better stability than the one made from pristine SNC. This study highlights the potential of SNC as a particle emulsifier and demonstrates how esterification can improve its emulsification capabilities.

Laurdan Discerns Lipid Membrane Hydration and Cholesterol Content.

Studies of biological membrane heterogeneity particularly benefit from the use of the environment-sensitive fluorescent probe Laurdan, for which shifts in the emission, produced by any stimulus (e.g., fluidity variations), are ascribed to alterations in hydration near the fluorophore. Ironically, no direct measure of the influence of the membrane hydration level on Laurdan spectra has been available. To address this, we investigated the fluorescence spectrum of Laurdan embedded in solid-supported lipid bilayers as a function of hydration and compared it with the effect of cholesterol─a major membrane fluidity regulator. The effects are illusively similar, and hence the results obtained with this probe should be interpreted with caution. The dominant phenomenon governing the changes in the spectrum is the hindrance of the lipid internal dynamics. Furthermore, we unveiled the intriguing mechanism of dehydration-induced redistribution of cholesterol between domains in the phase-separated membrane, which reflects yet another regulatory function of cholesterol.

Untangling the Interactions between Anionic Polystyrene Nanoparticles and Lipid Membranes Using Laurdan Fluorescence Spectroscopy and Molecular Simulations.

Several classes of synthetic nanoparticles (NPs) induce rearrangements of cell membranes that can affect membrane function. This paper describes the investigation of the interactions between polystyrene nanoparticles and liposomes, which serve as model cell membranes, using a combination of laurdan fluorescence spectroscopy and coarse-grained molecular dynamics (MD) simulations. The relative intensities of the gel-like and fluid fluorescent peaks of laurdan, which is embedded in the liposome membranes, are quantified from the areas of deconvoluted lognormal laurdan fluorescence peaks. This provides significant advantages in understanding polymer-membrane interactions. Our study reveals that anionic polystyrene NPs, which are not cross-linked, induce significant membrane rearrangement compared to other cationic or anionic NPs. Coarse-grained MD simulations demonstrate that polymer chains from the anionic polystyrene NP penetrate the liposome membrane. The inner leaflet remains intact throughout this process, though both leaflets show a decrease in lipid packing that is indicative of significant local rearrangement of the liposome membrane. These results are attributed to the formation of a hybrid gel made up of a combination of polystyrene (PS) and lipids that forces water molecules away from laurdan. Our study concludes that a combination of negative surface charge to interact electrostatically with positive charges on the membrane, a hydrophobic core to provide a thermodynamic preference for membrane association, and the ability to extend non-cross linked polymer chains into the liposome membrane are necessary for NPs to cause a significant rearrangement in the liposomes.

Green composites made of polyhydroxybutyrate and long-chain fatty acid esterified microcrystalline cellulose from pineapple leaf.

Pineapple leaf fibres are an abundant agricultural waste product that contains 26.9% cellulose. The objective of this study was to prepare fully degradable green biocomposites made of polyhydroxybutyrate (PHB) and microcrystalline cellulose from pineapple leaf fibres (PALF-MCC). To improve compatibility with PHB, the PALF-MCC was surface modified using lauroyl chloride as an esterifying agent. The influence of the esterified PALF-MCC laurate content and changes in the film surface morphology on biocomposite properties was studied. The thermal properties obtained by differential scanning calorimetry revealed a decrease in crystallinity for all biocomposites, with 100 wt% PHB displaying the highest values, whereas 100 wt% esterified PALF-MCC laurate showed no crystallinity. The addition of esterified PALF-MCC laurate increased the degradation temperature. The maximum tensile strength and elongation at break were exhibited when adding 5% of PALF-MCC. The results demonstrated that adding esterified PALF-MCC laurate as a filler in the biocomposite film could retain a pleasant value of tensile strength and elastic modulus whereas a slight increase in elongation can help to enhance flexibility. For soil burial testing, PHB/ esterified PALF-MCC laurate films with 5-20% (w/w) PALF-MCC laurate ester had higher degradation than films consisting of 100% PHB or 100% esterified PALF-MCC laurate. PHB and esterified PALF-MCC laurate derived from pineapple agricultural wastes are particularly suitable for the production of relatively low-cost biocomposite films that are 100% compostable in soil.